Configuratore gruppi elettrogeni

Find the right generator

Tell us what you need to power: we propose the generator with the right power


Generator Configurator: The Right Generator

Choosing a generator by looking only at the kVA on the label often leads to the wrong purchase. A generator that is too small stalls or cannot start the well pump, the compressor or the air conditioner; one that is too big costs more, uses more fuel and, running almost unloaded, wears out sooner. Then there are the voltage, the type of use, the fuel and the noise. That is why we created the Pumps & Gardens generator configurator: a simple tool that guides you, question by question, to describe what you need to power.

With the information you provide, the specialised technical team of Pumps & Gardens calculates the power you need, including the starting current of electric motors, and proposes, usually within a few working hours, the right generator: with the right power, the voltage you need and the most convenient fuel and starting system for your use.

Do you need a generator for your home during power cuts, for a building site, for a farm with no grid connection, for your camper or campsite, for an outdoor event, or a PTO generator driven by your tractor? The configurator helps you choose the right generator even if you have no technical knowledge.

How the generator configurator works

  1. Tell us where and how you use it. Home backup, building site, farm, camper, events or business; a few hours now and then or many hours a day. If you are replacing a generator, write its brand, model and power: many questions will no longer be needed.
  2. List the appliances to power. Pumps, fridges and freezers, boiler, lights, tools, welder, air conditioners: with their rated power if you know it, and which ones run at the same time. If you do not know a value, just say so: we will use a safe value or ask you.
  3. Receive the solution. The technical team proposes the most suitable generator, with a reasoned alternative and any accessories, such as an ATS automatic transfer panel or a wheel kit.

What information is needed to choose the right generator

A generator is chosen on four factors: power, voltage, type of use and where it works. You do not need to do any calculations: just answer the configurator's questions.

  • Power: the total power of the appliances running at the same time, plus the starting current of electric motors. Pumps, compressors, fridges and air conditioners draw 2 to 3 times their rated power when starting: a 1.5 kW submersible pump usually needs a 5-6 kVA generator.
  • Voltage: single-phase 230 V for the home and tools, three-phase 400 V for three-phase motors and machines. On three-phase generators the 230 V sockets deliver only part of the total power.
  • Use: occasional backup or continuous work for many hours; recoil, electric or automatic start when the mains fails.
  • Place and fuel: petrol for light, occasional use, diesel for long hours and higher power; a silenced version near homes, campsites and events; inverter for computers, gas boilers and electronic devices.

A useful reference: kVA is the apparent power, kW the power that actually reaches the appliances. With electric motors, roughly kW = kVA × 0.8: a 5 kVA generator therefore delivers about 4 kW.

Which generator for your needs

Portable petrol generators

Light and easy to move: for the home during a blackout, for garden or site tools, for a country house. Available with recoil or electric start, single-phase or three-phase, also with an AVR voltage regulator for a more stable supply.

Inverter generators

They produce clean, stable power, suitable for computers, TVs, gas boilers and battery chargers. They are quiet and light and adjust engine speed to the load, using less fuel: ideal for campers, boats, campsites and markets.

Diesel generators

For many hours of work a day with low fuel consumption: on farms with no mains supply, on building sites, for irrigation. Single-phase or three-phase, with recoil or electric start.

Silenced generators

Engine and alternator are enclosed in a soundproof canopy: noise drops and the generator can run close to homes, offices, campsites and events. They are the most common choice as a fixed standby generator for homes, shops, livestock farms and small businesses.

Generators with ATS automatic panel

The ATS panel monitors the mains: when the power fails it starts the generator and switches the system over to it; when the power returns it switches the system back to the mains and stops the generator. It requires a generator with electric start. It is the solution for lifting pumps, cold rooms, livestock farms, isolated houses and businesses that cannot be left without power.

PTO tractor generators

They have no engine of their own: they are connected to the tractor's power take-off with a cardan shaft. Ideal on farms and in livestock buildings to power pumps, milking machines, ventilation and sheds during blackouts. The minimum tractor power is stated for each model.

Brands in the configurator

The configurator selects the solution from Airmec generators (petrol, inverter, diesel and silenced diesel, also with ATS panel) and CGM generators (Classic, Deluxe and Professional petrol, Classic Diesel, Quiet and Super Power silenced, inverter and PTO), with their accessories.

Why rely on the Pumps & Gardens technical team

  • Power based on the real load: kVA are calculated on the appliances you actually use together, including motor starting current.
  • The right supply for your appliances: AVR or inverter when you power electronics, single-phase or three-phase according to your system.
  • Reasoned alternatives: besides the main solution, we suggest an alternative and explain the differences.
  • No blind choices: if the information is not enough, the technical team asks you for what is missing instead of proposing a random generator.
  • Experience and technology: the expertise of people who choose generators for homes, farms and building sites every day, combined with tools that make the answer fast and accurate.

Frequently asked questions about the generator configurator

How many kVA do I need?

Add up the power of the appliances you want to use together and add the starting current of electric motors, which draw 2 to 3 times their rated power when starting. Lights, fridge and boiler in a home often need 3-4 kVA; with a well pump or an air conditioner you usually need 6-8 kVA. The configurator does the calculation for you.

Petrol or diesel?

Petrol if you use it for a few hours now and then: it costs less and is lighter. Diesel if it runs many hours a day or you need high power: it uses less fuel and lasts longer.

When do I need an inverter generator?

When you power computers, TVs, gas boilers with electronic boards or battery chargers, which need a very stable voltage, and when noise matters, for example in a camper or at a campsite.

Can the generator start by itself when the power fails?

Yes, with an electric-start generator and an ATS automatic panel: it starts the generator and switches the system over, then switches it back to the mains and stops the generator when the power returns.

Can I connect it to my home's electrical system?

Yes, but only through a mains/generator changeover switch or an ATS panel installed by an electrician, which prevents the generator from feeding power into the public grid.

Can I power my well pump?

Yes: give the pump's power, voltage and starting type. The configurator takes into account the starting current, which is particularly high for submersible pumps.

Looking for a pump too?

Use the pump configurator: the technical team proposes the right pump and control panel for your system.

Configure your generator now

Open the configurator and tell us what you need to power: the specialised technical team of Pumps & Gardens will propose, usually within a few working hours, the generator with the right power for your appliances and your use.