FB Submersible pump - FB4-3507 4'' - Noryl impeller

In stock
FREE SHIPPING
Regular price €177,01 EUR
Product details
  • Vendor F.B. srl
  • SKU FB4-3507 - 16060 FB Pompa sommersa FB4-3507 4''

4'' submersible pump for clean water, floating noryl impellers - DN100 - Maximum Flow Rate 140 l/min - H(m) 11 - Motor to be added: recommended FB 4B1M 1~230 (1 HP – 0.75 kW) or compatible

-


FB submersible pump end, FB4 series, for clean water in 4” wells (DN 100). Its very simple construction, anti-wear floating impellers and easy installation make this a long-lasting, high-quality product.

APPLICATIONS

  • agriculture
  • fire fighting
  • water supply
  • pressure boosting
  • domestic use
  • industry
  • irrigation

CONSTRUCTION

  • suction support, drive coupling, suction strainer, shaft, sleeve, cable guard, intermediate casings, non-return valve and delivery bowl in AISI 304 stainless steel
  • impellers, diffusers and upper support in noryl GFN2
  • intermediate spacer in sintered steel
  • rubber and EPDM O-rings

FB4 SERIES FEATURES

  • maximum flow rate: 400 l/min
  • maximum head: 392 m
  • maximum power: 7.5 kW
  • maximum overall diameter: 98 mm (cable guard included)
  • maximum water temperature: 35°C (pump end only; for the motor see the motor page)
  • maximum sand content: 150 g/m³

TECHNICAL DATA

  • Motor power to couple: 1 HP – 0.75 kW
  • Recommended motor: FB 4B1M – single-phase 230 V
  • Flow rate: 40 – 140 l/min
  • Head: 11 – 37 m (42 m at zero flow)
  • Discharge outlet: G 2”
  • Maximum diameter: 98 mm
  • Pump end length: 390 mm
  • Pump end weight: 3.7 kg
  • Speed: 2900 rpm

PERFORMANCE

Flow rate
l/min
Flow rate
m³/h
Flow rate
l/s
Head
m
00042
402.40.737
5030.836
603.6134
704.21.232
804.81.330
905.41.528
10061.725
1207.2219
1408.42.311

Tolerances according to EN ISO 9906 annex A gr. 2. Complies with EU Reg. 547/2012 (MEI ≥ 0.40).

PERFORMANCE CURVE

Curve drawn from FB catalogue data.

Performance curve FB submersible pump FB4-3507

Price refers to the pump end only: motor, coupling and cables not included.

PUMP END WITHOUT MOTOR

To run the pump you need a 4” submersible motor of 1 HP (0.75 kW), to be purchased separately. Below you will find the recommended motor and all compatible motors.

RECOMMENDED MOTOR

FB 4B1M – single-phase 230 V (capacitor in the control box): 4” submersible motor, aISI 304 stainless steel, oil filled, 1 HP – 0.75 kW.

COMPATIBLE MOTORS (1 HP – 0.75 kW)

AISI 304 stainless steel, oil filled – 4”

rewindable oil-filled 4” motor

  • FB 4B1M – single-phase 230 V (capacitor in the control box)
  • FB 4B1 – three-phase 400 V, direct start
  • FB 4B1 – three-phase 230 V

AISI 304 stainless steel, encapsulated, water filled – 4”

4” motor with encapsulated winding, water filled

  • FB 4F1M – single-phase 230 V (capacitor in the control box)
  • FB 4F1 – three-phase 400 V, direct start
  • FB 4F1 – three-phase 230 V

 

 

Not sure this is the right pump for your system?

Pump configurator

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›

-

Are you a business user and need an invoice? Buy on Termoverde.