Glong GL4 D30/30 4" pump end 3 HP

Pump end for 4" submersible pump Glong GL4 D30/30 - 2.2 kW (3 HP) - Max. flow rate 4.8 m³/h (80 l/min) - Max. head 193 m - 30 stages

-

Glong GL4 4" pump ends are a new, sturdy and compact design: patented independent floating impellers with no axial load on the motor, materials certified for drinking water that can run dry without damage, investment-cast AISI 304 stainless steel supports and built-in check valve. Sand-resistant up to 250 g/m³ and suitable for horizontal installation; they couple to NEMA 4" motors.

APPLICATIONS

• Water supply from wells or tanks
• Domestic and civil use
• Irrigation
• Water lifting plants, aqueducts, pressure boosting, fire-fighting and washing systems

OPERATING LIMITS

• Max. sand content: 250 g/m³
• Water level at least 1 m above the suction inlet
• Can also be installed horizontally
• Pumped liquid: clean, free from solids or abrasive substances, non-aggressive, non-viscous and chemically neutral

TECHNICAL DATA

• Power: 2.2 kW (3 HP)
• Max. flow rate: 4.8 m³/h (80 l/min)
• Max. head: 193 m
• Number of stages: 30
• Length: 728 mm
• Net weight: 7.3 kg
• With M4A 230V motor: total length 1290 mm, weight 24.7 kg, current 14.8 A, P1 3.27 kW
• With M4A 400V motor: total length 1192 mm, weight 19.8 kg, current 5.6 A, P1 3 kW
• Ports: top axial threaded outlet 1 1/4"

PERFORMANCE

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›

-

Manufacturer Technical Data Sheet

Are you a business user and need an invoice? Buy on Termoverde.