Injecta DI.MPO 01 DN25 PN40 PTFE remote

Injecta DI.MPO 01 DN25 PN40 PTFE remote - Magnetic induction flow meter - remote version, 5 m cable - flow range 0.6÷18 m³/h - 85÷265 Vac

-

Magnetic induction flow meter

Model DI.MPO 01 DN25 PN40 PTFE remote – flow range 0.6÷18 m³/h

Features

● Low-frequency programmable rectangular-wave magnetic excitation: stable measurement and low consumption

● 16-bit microprocessor: fast processing and high accuracy

● Bidirectional measurement: forward and reverse flow, 3 totalizers (forward, reverse and difference)

● Multifunction transmitter with self-test and self-diagnosis

● Settings and totalizers saved to EEPROM memory at power-off

Outputs and communication

● 4÷20 mA output (impedance 0÷500 Ohm)

● Frequency output 0.1÷10,000 Hz and galvanically isolated pulse output

● Modbus RTU communication (Hart optional)

Technical data

● Nominal diameter DN25, maximum pressure 4.0 MPa (PN40)

● PTFE lining, fluid temperature -40÷+150 °C

● SS321 stainless steel sensor, epoxy-painted aluminium housing

● Accuracy ±0.5%, repeatability ±0.1%, fluid velocity up to 10 m/s

● Minimum fluid conductivity 5 µS/cm

● Power supply 85÷265 Vac, consumption 6 W (max 8 W)

● Remote version: IP67 sensor, IP67 wall-mounted converter, 5 m connection cable

● Sensor dimensions: length 200 mm, flange Ø 115 mm

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›

-

Manufacturer Technical Data Sheet

Are you a business user and need an invoice? Buy on Termoverde.