FB 10F150H submersible motor 10'' 3~400V cast iron HT

In stock
FREE SHIPPING
Regular price €12.385,21 EUR
Product details
  • Vendor F.B. srl
  • SKU 10F150H - 3~400 - 18663 FB 10F150H - 3~400 Motor

High temperature submersible motor 10” (HighTemp, hot water up to 70°C) FB 10F150H, cast iron, 150 HP – 110 kW, three-phase 400 V, direct start - Pump end to be added

-


FB 10” rewindable water-filled submersible motor, for wells of 10” diameter or larger. Water-lubricated thrust and radial bearings allow long, maintenance-free operation.

The bidirectional “Michell” type thrust bearing in resin compound and graphite withstands high axial thrust; SIC-SIC silicon carbide mechanical seal and sand guard protect the motor even in sandy water. The motor is pre-filled with special Ecogel Plus liquid (storage from -48°C to +75°C), with pressure-compensating membrane, balanced and ground rotor, hand-made windings and drinking water approved cable (WRAS, KTW, ACS).

High temperature submersible motor (HighTemp): HT winding, stators and rotors with more steel and copper, silicon carbide SIC-SIC/Viton mechanical seal, EPDM gaskets, insulation class F, special Ecogel Plus filling liquid (storage temperature from -48°C to +75°C). Compared with the standard version the motor is longer and heavier.

TO BE USED

  • for hot water up to 70°C
  • in mines and quarries
  • in wells up to 900 m deep
  • with power supply tolerance 50-60 Hz -15% / +15%
  • with rated current tolerance In +15%
  • with rather long power cables
  • where there is no cooling flow up to a max. temperature of 30°C
  • where high system safety is required

TO BE USED

  • for hot water up to 70°C
  • in mines and quarries
  • in wells up to 900 m deep
  • with power supply tolerance 50-60 Hz -15% / +15%
  • with rated current tolerance In +15%
  • with rather long power cables
  • where there is no cooling flow up to a max. temperature of 30°C
  • where high system safety is required

MOTOR FEATURES

  • Rated power: 150 HP – 110 kW
  • Power supply: three-phase 400 V, direct start
  • Rated current: 217 A at 400 V
  • Starting current (direct start): 977 A
  • Full load efficiency: 87.1%
  • Full load power factor (cosφ): 0.84
  • Speed: 2907 rpm (2 poles)
  • Version: Cast iron – HighTemp winding for hot water up to 70°C
  • Maximum water temperature: 70°C
  • Motor length: 2030 mm
  • Net weight: 460 kg
  • Flange: 10”
  • Protection rating: IP68
  • Insulation class: F
  • Starts per hour: max. 10
  • Installation: vertical or horizontal (no horizontal installation for 170 and 190 kW motors)
  • Minimum cooling water speed: 0.15 m/s
  • Maximum installation depth: 500 m
  • Voltage tolerance: ±10%

ELECTRICAL DATA 50 Hz

Data from the FB submersible motors catalogue.

Voltage
V
Rated current
A
Starting current
A
Efficiency
%
cosφrpm
380224100886.10.852898
40021797787.10.842907
41521094587.30.832917
50017478386.10.852898
69012656787.10.842907

Price refers to the motor only: pump end, coupling and extension cable not included.

MOTOR WITHOUT PUMP END

The pump end must be purchased separately. Below you will find the versions of this motor and the matching FB pumps.

VERSIONS OF THIS MOTOR

  • FB 10F150H – three-phase 400 V, direct start
  • FB 10F150H – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)

COMPATIBLE FB PUMPS

Series FB10R – Cast iron

FB10RA/13A (cast iron), FB10RA/14A (cast iron), FB10RA/15A (cast iron), FB10RB/11A (cast iron), FB10RB/12A (cast iron)

Series FB10SX – Stainless steel AISI 304 / 316 / 904L

FB10SX180/6A-A (AISI 304 / AISI 316 / AISI 904L), FB10SX180/7C-A (AISI 304 / AISI 316 / AISI 904L), FB10SX190/6A-A (AISI 304 / AISI 316 / AISI 904L), FB10SX220/6A-A (AISI 304 / AISI 316 / AISI 904L), FB10SX250/5A-B (AISI 304 / AISI 316 / AISI 904L), FB10SX280/5G-B (AISI 304 / AISI 316 / AISI 904L)

Series FB12SX – Stainless steel AISI 304 / 316 / 904L

FB12SX360/2A-A (AISI 304 / AISI 316 / AISI 904L), FB12SX360/3P-A (AISI 304 / AISI 316 / AISI 904L), FB12SX450/2C-A (AISI 304 / AISI 316 / AISI 904L)

 

 

Not sure this is the right pump for your system?

Pump configurator

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›

-

Are you a business user and need an invoice? Buy on Termoverde.