FB 6F5H submersible motor 6'' Y/D 400V cast iron HT

In stock
FREE SHIPPING
Regular price €1.962,58 EUR
Product details
  • Vendor F.B. srl
  • SKU 6F5H - Y/D 400/690 - 18198 FB 6F5H - Y/D 400/690

High temperature submersible motor 6” (HighTemp, hot water up to 90°C) FB 6F5H, cast iron, 5.5 HP – 4 kW, star-delta 400/690 V - Pump end to be added

-


FB 6” rewindable water-filled submersible motor, for wells of 6” diameter or larger. Water-lubricated thrust and radial bearings allow long, maintenance-free operation.

The bidirectional “Michell” type thrust bearing in resin compound and graphite withstands high axial thrust; SIC-SIC silicon carbide mechanical seal and sand guard protect the motor even in sandy water. The motor is pre-filled with special Ecogel Plus liquid (storage from -48°C to +75°C), with pressure-compensating membrane, balanced and ground rotor, hand-made windings and drinking water approved cable (WRAS, KTW, ACS).

High temperature submersible motor (HighTemp): HT winding, stators and rotors with more steel and copper, silicon carbide SIC-SIC/Viton mechanical seal, EPDM gaskets, insulation class F, special Ecogel Plus filling liquid (storage temperature from -48°C to +75°C). Compared with the standard version the motor is longer and heavier.

TO BE USED

  • for hot water up to 90°C
  • in mines and quarries
  • in wells up to 900 m deep
  • with power supply tolerance 50-60 Hz -15% / +15%
  • with rated current tolerance In +15%
  • with rather long power cables
  • where there is no cooling flow up to a max. temperature of 30°C
  • where high system safety is required

MOTOR FEATURES

  • Rated power: 5.5 HP – 4 kW
  • Power supply: star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
  • Rated current: 9.9 A at 400 V – 5.6 A at 690 V
  • Full load efficiency: 74.8%
  • Full load power factor (cosφ): 0.8
  • Speed: 2852 rpm (2 poles)
  • Version: Cast iron – HighTemp winding for hot water up to 90°C
  • Maximum water temperature: 90°C
  • Motor length: 740 mm
  • Net weight: 52 kg
  • Flange: 6” NEMA
  • Protection rating: IP68
  • Insulation class: F
  • Starts per hour: max. 20
  • Installation: vertical or horizontal (no horizontal installation for 37 and 45 kW motors)
  • Minimum cooling water speed: 0.15 m/s
  • Maximum installation depth: 500 m
  • Voltage tolerance: ±10%

ELECTRICAL DATA 50 Hz

Data from the FB submersible motors catalogue.

Voltage
V
Rated current
A
Starting current
A
Efficiency
%
cosφrpm
23016.85974.80.82852
380103574.40.812839
4009.93574.80.82852
4159.63574.80.762866
5007.92874.40.812839
6905.619.674.80.82852

Price refers to the motor only: pump end, coupling and extension cable not included.

MOTOR WITHOUT PUMP END

The pump end must be purchased separately. Below you will find the versions of this motor and the matching FB pumps.

VERSIONS OF THIS MOTOR

  • FB 6F5H – three-phase 400 V, direct start
  • FB 6F5H – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)

COMPATIBLE FB PUMPS

Series FB6R – Stainless steel AISI 304

FB6RB/9 (AISI 304), FB6RD/6 (AISI 304), FB6RE/5 (AISI 304), FB6RF/4 (AISI 304), FB6RH/3 (AISI 304), FB6RL/2 (AISI 304)

Series FB6RX – Stainless steel AISI 304 / 316

FB6RX13/8 (AISI 304), FB6RX13/8 (AISI 316), FB6RX13/9 (AISI 304), FB6RX13/9 (AISI 316), FB6RX20/5 (AISI 304), FB6RX20/5 (AISI 316), FB6RX20/6 (AISI 304), FB6RX20/6 (AISI 316)

Series FB6SX – Stainless steel AISI 304 / 316 / 904L

FB6SX25/4A-A (AISI 304 / AISI 316 / AISI 904L), FB6SX35/3A-A (AISI 304 / AISI 316 / AISI 904L), FB6SX45/2A-A (AISI 304 / AISI 316 / AISI 904L), FB6SX45/3A-A (AISI 304 / AISI 316 / AISI 904L), FB6SX55/2A-B (AISI 304 / AISI 316 / AISI 904L), FB6SX55/3A-B (AISI 304 / AISI 316 / AISI 904L), FB6SX65/2A-B (AISI 304 / AISI 316 / AISI 904L), FB6SX70/2A-B (AISI 304 / AISI 316 / AISI 904L)

Series FB8SX – Stainless steel AISI 304 / 316 / 904L

FB8SX75/1A-A (AISI 304 / AISI 316 / AISI 904L), FB8SX90/1K-A (AISI 304 / AISI 316 / AISI 904L), FB8SX110/1T-A (AISI 304 / AISI 316 / AISI 904L), FB8SX130/1T-B (AISI 304 / AISI 316 / AISI 904L), FB8SX160/1X-B (AISI 304 / AISI 316 / AISI 904L), FB8SX170/1X-B (AISI 304 / AISI 316 / AISI 904L)

 

 

Not sure this is the right pump for your system?

Pump configurator

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›

-

Are you a business user and need an invoice? Buy on Termoverde.