Injecta Nexus NX.6500 S-TB/TB

Injecta Nexus NX.6500 S-TB/TB - Measuring instrument for dosing pumps - Panel version - 0÷1/0÷10/0÷100 FTU/NTU / TEMP - 100/240 vac 50/60hz 10W

-

TOOLS FOR PROCESS ANALYSIS

● DISPLAY OF SIMULTANEOUS MEASUREMENT VALUES (NUMERICAL and BARGRAPH) and TEMPERATURE

● SCROLLING OUTPUT VALUES

● GRAPHIC ICONS FOR: STATUS OF DIGITAL OUTPUTS, WASHING CYCLE, DATA RECORDING, ALARMS

● POSSIBILITY TO SEE ONLY THE MEASUREMENT IN LARGE SIZE

● DATA RECORDING

● INTERNAL FLASH MEMORY 4 Mbit (approximately 16,000 RECORDINGS)

● RECORDING INTERVAL: 1÷99 min

● TYPE: CIRCULAR (F.I.F.O.) or FILLING

● POSSIBILITY TO VIEW THE RECORDED DATA IN TABLE AND GRAPHIC FORMAT, WITH INDICATION OF MAXIMUM, MINIMUM AND AVERAGE VALUES OF THE SELECTED PERIODS

● PID REGULATION

● P - PI - PID FUNCTIONS ACTIVATED ON THE ANALOGUE OR DIGITAL OUTPUT

● PROPORTIONAL RANGE: 0÷500%

● INTEGRAL TIME: 0:00÷5:00 min

● DERIVATIVE TIME: 0:00÷5:00 min

● 2 ANALOGUE OUTPUTS

● OUTPUT 1 PROGRAMMABLE FOR MEASUREMENT

● OUTPUT 2 PROGRAMMABLE FOR MEASUREMENT / TEMPERATURE / PID REGULATION

● THE LIMITS OF THE OUTPUTS ARE FREELY PROGRAMMABLE WITHIN THE MEASUREMENT RANGE

● 4 DIGITAL OUTPUTS

● ON/OFF SET POINT: PROGRAMMING OF THE OPERATING RANGE (HYSTERESIS/DIRECTION) AND START/STOP TIME 000÷999 SEC.

● PID REGULATION: PULSES, FREQUENCY or PWM (2 SET POINTS)

● PROGRAMMABLE ALARM FOR: INSTRUMENT ANOMALIES, MINIMUM, MAXIMUM, SET POINT DELAY, Dwell TIME (LIVE CHECK)

● DELAY TIME: 00:00÷59:99 mm:ss WITH MINIMUM INTERVAL OF 15 sec.

● PERMANENT TIME 00:00÷99:999 hh:mm

● SET POINT DEACTIVATION (IN CASE OF ALARM): ENABLE/DISABLE

● WASHING ELECTRODES

● PROGRAMMING OF THE INTERVAL (MINIMUM 15 min) AND DURATION

● DURING WASHING, ALL ANALOGUE AND DIGITAL OUTPUTS ARE FREEZED

● DIGITAL INPUT

● FOR DISABLING DOSAGES

● RS485 SERIAL PORT

● FOR REMOTE SET UP AND REAL TIME ACQUISITION OR TO DOWNLOAD DATA (VIA DEDICATED SOFTWARE)

● MODBUS RTU COMMUNICATION PROTOCOL

● USB PORT

● USB FOR DIRECT DOWNLOAD ON PEN DRIVE (OPTIONAL)

● MANUAL CONTROLS

● POSSIBILITY OF SIMULATING ANALOGUE AND DIGITAL OUTPUTS FROM THE KEYBOARD

● TEMPERATURE COMPENSATION

● VIA PT100 SENSOR WITH 3 OR 4 WIRE, OR PT1000


● FRAMEWORK VERSION
● 96x96x133 mm
● 100/240 vac 50/60hz
● 100/240 vac 50/60hz 10W

-

Manufacturer

Are you a business user requiring an invoice? Purchase now on Termoverde